Stockport · Greater Manchester · MCS-checked

Heat pump installers in Stockport

Compare MCS-certified heat pump installers across Stockport, covering the town centre, the Victorian and interwar suburbs, and the larger properties towards Bramhall, Cheadle Hulme and Marple.

33
installers in Stockport
MCS
certification checked

Listings last reviewed 14 September 2026

Local context

Heat pumps in Stockport

Stockport has a notably varied housing stock, running from dense town centre terraced property through extensive interwar semi-detached suburbs to larger detached homes in the southern parts of the borough.

Interwar and post-war semis are often among the more straightforward properties to fit: cavity walls, usually some existing loft insulation, and enough outdoor space to site the unit without difficulty. Larger detached homes have higher total heat demand but generally fewer siting constraints.

Parts of the borough, particularly around Marple and the eastern fringe, sit closer to the Peak District and are more exposed. Correct sizing matters more in these locations than in sheltered suburban streets.

Finding a heat pump installer in Stockport: every company listed on this page is cross-checked against the official MCS certified register. MCS certification matters because only an MCS-certified installer can claim the £7,500 Boiler Upgrade Scheme grant on your behalf — it is a hard requirement of the scheme, not a preference. Listings are free and ranked alphabetically; the single paid Featured slot per area is clearly badged as such. Use the search and filters below to find installers near you, then verify certification directly at mcscertified.com before you commit.

Map view
Cost guide

What does a heat pump installation cost in 2026?

Typical air source install £8,000 – £14,000

Before any grant, for a standard 3-4 bedroom home. Ground source systems typically cost more due to the groundworks needed for the ground loop.

Boiler Upgrade Scheme grant £7,500 off

Available for air source and ground source heat pumps in England and Wales, applied upfront by your MCS-certified installer and deducted from your invoice — no repayment, no income cap.

Off-grid oil/LPG homes £9,000 off

A temporary uplift for eligible off-gas-grid properties, running 21 July 2026 to 31 March 2027. Air-to-air heat pumps qualify for a smaller £2,500 grant.

Before you book

How to choose an installer — a 60-second checklist

Common questions

Heat pump FAQs

Which Stockport property types suit heat pumps best?

Interwar and post-war semi-detached houses are often the most straightforward, because they typically have cavity walls that are cheaper to insulate and sufficient outdoor space for the unit. Larger detached properties also work well but need a bigger system. Older solid-walled terraces are viable but usually need more insulation or radiator work first.

What does MCS certified mean?

MCS (Microgeneration Certification Scheme) certification means an installer has been independently assessed against UK quality standards for renewable heating installations. It's required both for installation quality assurance and to claim the Boiler Upgrade Scheme grant — only MCS-certified installers can apply it on your behalf. Use the MCS badge shown on listings here to check at a glance, or verify any installer directly at mcscertified.com. Read our full MCS certification guide →

How much is the heat pump grant in 2026?

The Boiler Upgrade Scheme offers £7,500 towards an air source or ground source heat pump in England and Wales, or £2,500 for an air-to-air heat pump. A temporary £9,000 grant applies to eligible off-gas-grid homes currently heated by oil or LPG, running from 21 July 2026 to 31 March 2027. The grant is deducted from your invoice upfront by your MCS-certified installer. Check your eligibility in 2 minutes →

How much does a heat pump cost to install?

Before any grant, a typical air source heat pump installation for a 3-4 bedroom home costs roughly £8,000–£14,000, including the unit, cylinder and any radiator upgrades. Ground source systems usually cost more due to the groundworks required for the ground loop. After the £7,500 Boiler Upgrade Scheme grant, many homeowners pay a net cost broadly comparable to a premium boiler replacement. See the full costs vs savings breakdown →

Do I need planning permission for a heat pump?

Most homes can install an air source heat pump under permitted development, without planning permission, provided it meets size and placement rules (such as being at least one metre from the property boundary). Listed buildings, conservation areas, and flats can have extra restrictions — check with your local planning authority or ask your installer to confirm before booking.

Will a heat pump work in an older, less insulated home?

Yes, but insulation and radiator sizing matter more than with a gas boiler, since heat pumps run at lower flow temperatures. A good installer will assess your home's heat loss and may recommend larger radiators or improved insulation alongside the heat pump to keep it running efficiently.

How long does installation take?

A typical air source heat pump installation takes 2-3 days for a straightforward home. Ground source installations take longer due to the groundworks needed to lay the ground loop, sometimes a week or more depending on the method used.

Are heat pump grants available in Scotland, Wales and Northern Ireland too?

Yes, but each nation runs a different scheme. England and Wales share the Boiler Upgrade Scheme (£7,500). Scotland has its own Home Energy Scotland Grant and Loan (up to £9,000 grant plus an optional £7,500 interest-free loan). Wales homeowners can also access the Nest scheme alongside BUS. Northern Ireland's support is smaller and means-tested, via the Affordable Warmth Scheme. See our full grants guide for links to apply for each.

Has the EPC insulation requirement for the Boiler Upgrade Scheme changed?

Yes — from April 2026, the requirement to have no outstanding EPC insulation recommendations (such as loft or cavity wall insulation) was removed from the Boiler Upgrade Scheme in England and Wales. You still need a valid EPC (issued within the last 10 years), but outstanding insulation recommendations no longer block your application.

How do I apply for the Boiler Upgrade Scheme?

You don't apply directly — your MCS-certified installer applies on your behalf as part of quoting and booking your installation. The grant is issued as a voucher to your installer and deducted from your invoice, so you never handle the paperwork or payment yourself. Home Energy Scotland works differently: in Scotland, you apply directly before installation begins, rather than through your installer. See the full step-by-step walkthrough →